When it comes to what is better to use to decorate a house, what everyone thinks of is ceramic tiles. In the process of ceramic tiles, adhesives such as tile adhesive are used, and many people worry aboutwhether the ceramic tiles are good or not. OK, polluting the air? So let’s learn about this in today’s topic!
1. Tile adhesive
Tile adhesive is an adhesive for ceramic tiles. It is mainly used on ceramic tiles such as ceramic tiles, floor tiles, and wall tiles. It is used in a wide range of applications, such as walls, floors, kitchens, bathrooms, etc. Due to its posted nature, it is waterproof and frost-resistant.
1. Advantages
The construction is very simple with only a thin layer, and the tiles do not need to be soaked in water in advance, which greatly saves time and space; due to its strong posting properties and high adhesion, it is basically no There is a possibility of hollowing or falling; the pollution is small. Reduce the possibility of waste, non-toxic and additive-free, and environmentally friendly.
2. Disadvantages
The cost is high, for example, tile glue on the floor is about 12 to 15 yuan per square meter, while tile glue on the wall is about 20 yuan. It is difficult to tell whether the tile glue is genuine or fake, and low-quality ones are toxic to a certain extent and have poor environmental protection.
2. Characteristics of tile adhesive
High adhesion, no need to soak bricks into wet walls during construction, good flexibility, waterproof, impermeable, crack-resistant, aging resistance, high temperature resistance, freeze-thaw resistance, non-toxic and environmentally friendly, and easy to construct.
3. Application scope of tile adhesive
Suitable for indoor and outdoor ceramic wall and floor tiles, ceramicMosaic pasting is also suitable for waterproofing layers on internal and external walls of various buildings, pools, kitchens and bathrooms, basements, etc. It is used for pasting ceramic tiles on the protective layer of the external insulation system, and the protective layer material needs to be cured to a certain strength. The base surface should be dry, firm, smooth, free of oil, dust, and release agents.
4. How to use tile adhesive
1. Wet construction of walls and floors. The inside of walls and floors must be kept dry. The surfaces of walls and floors need to be kept smooth. Uneven or rough surfaces can be smoothed with cement mortar.
2. Remove floating ash, oil and other stains from the base layer, otherwise it will affect the adhesion of the tile adhesive.
3. Adjust the adhesive, the water-cement ratio is about 1:4, and stir evenly. The adhesive should be used up within 5 to 6 hours.
4. Apply the mixed adhesive to the back of the tiles to be laid, and press firmly until the tile surface is flat. The tiles laid within 15 minutes can be moved to correct their position.
So for today’s topic Is tile adhesive good, does it pollute the air? Judging from the above characteristics of tile adhesive, it is obvious that it will not pollute the air. Tile adhesive is only a material used in the process of laying tiles, so it will not pollute the air. So the above is what the editor has shared with you about Is tile adhesive good? I hope it will be helpful to you.
